missing translation for 'onlineSavingsMsg'
Learn More

Thermo Scientific™ Barnstead™ LabTower™ RO Water Purification System

Codice prodotto. p-4531514 Sfoglia Tutto Thermo Scientific Prodotti
Click to view available options
Descrizione:
LabTower RO 20L/hr.
LabTower RO 40L/hr.
LabTower RO 60L/hr.
Prestazioni di permeazione:
20 L/hr. at 10°C
40 L/hr. at 10°C
60 L/hr. at 10°C
Requisiti elettrici:
100/240 V 50/60 Hz
90/240 V 50/60 Hz
Dimensione della confezione:
Pezzo
Les retours ne sont pas autorisés pour ce produit. Consulta la politica di reso

Codice prodotto. 11386991

Marca: Thermo Scientific™ 50132390

Effettua il per acquistare questo articolo Hai bisogno di un conto web ? Registrati oggi stesso!

Questo articolo non è attualmente disponibile o è stato dismesso.
La preghiamo di consultare la pagina del prodotto per individuare le possibili alternative.
Visualizzare prodotti alternativi

Les retours ne sont pas autorisés pour ce produit. Consulta la politica di reso

Convert tap water into reverse osmosis water with integrated 100L storage using the Thermo Scientific™ Barnstead™ LabTower™ RO Water Purification System.

Convert tap water into reverse osmosis (RO) water with integrated 100L storage using the Thermo Scientific™ Barnstead™ LabTower™ RO Water Purification System, which allows the user to easily read parameters with an ultra-modern controller. Mounted on casters, this compact system is an ideal pure water supply for any laboratory. The system is well-suited as a feed water source for dishwashers, autoclaves and general laboratory use. Choose from two system options with permeate flows of 20, 49 or 60L/hr. Resistivity/conductivity is clearly displayed on a large back-lit control panel that tilts for optimum viewing.

Advanced technology in a mobile design:

  • An ultra-modern microprocessor control provides easy-to-read system parameters.
  • Completely drainable integrated 100L high-purity water reservoir has a low-noise pressure booster as a standard component.
  • Mounted on casters, the compact LabTower RO system is an ideal pure water supply for any laboratory.
  • System is ideally suited as a feed water source for dishwashers, autoclaves and general laboratory use.
  • A built-in pretreatment unit — consisting of a hardness stabilizer for protection of the reverse osmosis module from hardness formers and an activated carbon/5μm combi-cartridge — protects the system against free chlorine and particles, ensuring the long service life of downstream purification stages.

Compact and mobile design:

  • System includes three system options with permeate flows of 20, 40 or 60L/hr.
  • Stand-alone design with integrated 100L tank takes up ZERO bench space—casters allow for easy relocation.
  • Systems can be upgraded later to accommodate growing water capacity demands.

Integrated 100L reservoirL

  • System stores 100L of  RO water in a high-purity polyethylene PE opaque reservoir.
  • Adjustable reservoir volume can be programmed for times of low demand—dispense from the reservoir to supply autoclaves, dishwashers, ultrapure water systems, etc.

Easy-to-operate clear display:

  • Resistivity/conductivity clearly displayed on large back-lit control panel that tilts for optimum viewing.
  • Status of current operating mode clearly indicating “production”, “stand-by”, “cleaning” or “disinfection” modes.
  • Reservoir fill-level is shown as a percent.
  • System parameters are code-protected to prevent accidental changes to set points.

GLP-compliant documentation:

  • LabTower RO has been developed to fulfill GLP requirements.
  • Recorded and traceable data can be obtained by printout via the RS-232 interface and accessory printer.
  • Highly qualified and precise measurement of the conductivity is ensured by the cell constant of 0.16 cm-1.
TRUSTED_SUSTAINABILITY

Specifica

Contenuto batterico 99%
Descrizione LabTower RO 20L/hr.
Controllo dell'acqua di alimentazione Yes
Sorgente acqua di alimentazione Tap
Portata 20 L/hr. at 10°C
TOC Monitor with UV Intensity Monitoring No
Tipo Reverse Osmosis Water Purification System
Connettore acqua di alimentazione 3/4 in. NPT
Pressione acqua di alimentazione 1 to 6 Bar
Pressione di esercizio 2 to 6 bar
Particelle > 0,2 µM/mL <1 μM/mL
Prestazioni di permeazione 20 L/hr. at 10°C
Consumo energetico 0.25 kW
Rimozione silice 98%
Temperature Range (Metric) 2°C to 35°C
Larghezza (sistema metrico) 450 mm
Altezza (sistema metrico) 1500 mm
Profondità (sistema metrico) 580 mm
Peso netto (sistema metrico) 50 kg
Requisiti elettrici 100/240 V 50/60 Hz
Tensione 100/240 V
Frequenza 50/60 Hz
Vedi altri risultati Mostra meno risultati
Correzione del contenuto del prodotto

Fornite il vostro feedback sul contenuto del prodotto compilando il modulo sottostante.

Titolo del prodotto

Facendo clic su Invia, l'utente riconosce che potrebbe essere contattato da Fisher Scientific in merito al feedback fornito in questo modulo. Non condivideremo le vostre informazioni per altri scopi. Tutte le informazioni di contatto fornite saranno conservate in conformità con la nostra Politica sulla privacy. Informativa sulla privacy.

Grazie per averci aiutato a migliorare il nostro sito web. Il vostro feedback è stato inviato